Low Energy BLE Modules Mesh/iBeacon

USR-BLE100 is an ultra-low power V4.1 bluetooth module.It is used for point-to-point data transparent transmission.

  • SMD Type
  • Ble4.1 protocol
  • Operation temperature Range of -40℃ ~85℃
General Details

Introduction of BLE Modules

USR-BLE100 is an ultra-low power V4.1 bluetooth module. It is used for point-to-point data transparent transmission. User’device can communicate immediately after simple setup without concerning about transport protocol. The module supports master and slave mode. User not only can use both master and salve for transparent transmission, also can develop APP on the basis of standard BLE protocol. The module supports one-to-many broadcast, and has built-in iBeacon protocol. User can make it an iBeacon equipment with simple setup.

Features of BLE Modules

  • Support standard BLE protocol
  • Low power broadcast mode of 1.3uA, sleep mode of 150nA,a variety of wake-up methods
  • Master/slave mode, quick switch
  • Setup methods: serial AT command,transparent transmission AT command
  • Support one-to-many data broadcast mode, built-in iBeacon protocol
  • Support Mesh networking mode to realize bluetooth self-organized network
  • Support UART Interface
  • 1.9V~5.5V single supply
  • Support power detection function

Application field of BLE Modules

  • Wearable smart devices
  • Industrial data acquisition
  • Intelligent instrument
  • Sports smart devices
  • Medical intelligent device
  • Smart mobile terminal
  • Indoor localization
  • Information identification
  • iBeacon
  • Homekit

Function of BLE Modules

Low Power Bluetooth Module

Transmission chart of BLE Modules

transmission chart

Master/slave mode of BLE Modules


iBeacon of BLE Modules


Images of BLE Modules

Ble Modules

Wireless Parameter
Wireless Standard802.15.1
Frequency Range2.402GHz-2.480GHz
Transmit Power-18dBm to +3dBm
User can configure the power
Receiving Sensitivity-89dBm
Antenna SelectionExternal: I-PEX connector
Internal: on-board antenna
Hardware Parameter
Data InterfaceUART: 2400bps - 115200bps
Working Voltage1.9V~5.5V
Working Current 60nA~12mA
Working Temp-40°C- 85°C
Storage Temp-40°C- 125°C
Software Parameter
Device TypeMaster/slave device
Security Mechanism128 bit AES engine
EncryptionPC1 encryption
Working ModeMaster device,slave device,broadcast mode
Setting CommandAT+ command structure
User ConfigurationSerial AT command,transparent transmission AT command
Application SoftwareSupport customization









*Leave message:

Verify Code: captcha