Industry News

Dropout and Re-connection Problems of Serial Device Server

Dropout and Re-connection Problems of Serial Device Server

The serial device server has dropout and re-connection problems every once in a while:

The Difference between GSM and GPRS

The Difference between GSM and GPRS

1.GSM is the abbreviation of Global System for Mobile Communications.2.GPRS is the abbreviation of General Packet Radio Service.3.GPRS is a packet data bearer a

Serial Device Server Cross-Network Segment

Serial Device Server Cross-Network Segment

If the IP of the device is not in a network segment with the communicating PC, and it is directly connected to the network cable, or is under the same sub-router, then the two cannot communicate at all. For example, device’s IP: 192.168.1.66 sub network mask: 255.255.255.0 PC’s IP: 192.168.0.161 sub network mask: 255.255.255.0

Multiple Network Card and Firewall Problems of Serial Device Server

Multiple Network Card and Firewall Problems of Serial Device Server

Multiple Network Card and Firewall Problems of Serial Device Server Multiple network card and firewall problems There are a lot of situations in these two prob

How to Switch the RS485 Interface of Multiple Serial Device Server

How to Switch the RS485 Interface of Multiple Serial Device Server

Most of the projects that use Ethernet for networking today use RS232 or RS485 interface, and the usage share of the RS422 interface is relatively small. However, in order to meet the needs of the public, the serial port is usually made into a mode that can switch interfaces freely. For example, USR eight serial device server USR-N668.

Industrial M4 Serial-to-Etherent Products WebSocket Function

Industrial M4 Serial-to-Etherent Products WebSocket Function

This manual is to introduce M4 series serial-to-Ethernet products WebSocket function. Introduction M4 series serial-to-Ethernet products support WebSocket function which can achieve real-time interaction between serial port and Web Server and display user data on Web Server.

Introduction of Serial to Ethernet Converter-USR-TCP232-410S

Introduction of Serial to Ethernet Converter-USR-TCP232-410S

Serial to ethernet converter USR-TCP232-410s is an ultimate serial converter connect to RS232/RS485 based equipment across an ethernet network enable you to replace serial dial-up modem connection.To realize two-way transparent transmission between COM Ethernet and TCP/IP,manage COM on remote device over network. To communicate to multiple serial devices at the same time across a LAN or WAN network.

The TCP Client Function and TCP Server Function of Serial Device Server-USR-TCP232-410S

The TCP Client Function and TCP Server Function of Serial Device Server-USR-TCP232-410S

Serial Device Server-USR-TCP232-410S supports dual sockets mode. Socket A supports TCP Server, TCP Client, UDP Server, UDP Client and HTTP Client. Socket B supports TCP Client and UDP Client. This article introduces the TCP Client Function and TCP Server Function of Serial Device Server-USR-TCP232-410S.

GPRS Application Scenario

GPRS Application Scenario

GPRS Application Scenario

The Working Principle of GPRS Modem

The Working Principle of GPRS Modem

The introduction of the GPRS modem’s working principle:The communication between the modem and the server is initiated by the GPRS modem (client), and the