Bluetooth Low Energy/BLE Module, Mesh/iBeacon

Bluetooth Low Energy/BLE Module, Mesh/iBeacon

Model: USR-BLE100

USR-BLE100 is Bluetooth v4.1 Low Energy/BLE Module, Mesh/iBeacon, It is used for point-to-point data transparent transmission.
  • SMD Type
  • Ble4.1 protocol
  • Operation temperature Range of -40℃ ~85℃

Bluetooth Low Energy/BLE Module, Mesh/iBeacon

General Details

Introduction of BLE Modules

USR-BLE100 is an ultra-low power V4.1 bluetooth module. It is used for point-to-point data transparent transmission. User’device can communicate immediately after simple setup without concerning about transport protocol. The module supports master and slave mode. User not only can use both master and salve for transparent transmission, also can develop APP on the basis of standard BLE protocol. The module supports one-to-many broadcast, and has built-in iBeacon protocol. User can make it an iBeacon equipment with simple setup.

Features of BLE Modules

  • Support standard BLE protocol
  • Low power broadcast mode of 1.3uA, sleep mode of 150nA,a variety of wake-up methods
  • Master/slave mode, quick switch
  • Setup methods: serial AT command,transparent transmission AT command
  • Support one-to-many data broadcast mode, built-in iBeacon protocol
  • Support Mesh networking mode to realize bluetooth self-organized network
  • Support UART Interface
  • 1.9V~5.5V single supply
  • Support power detection function

Application field of BLE Modules

  • Wearable smart devices
  • Industrial data acquisition
  • Intelligent instrument
  • Sports smart devices
  • Medical intelligent device
  • Smart mobile terminal
  • Indoor localization
  • Information identification
  • iBeacon
  • Homekit

Function of BLE Modules

Low Power Bluetooth Module

Transmission chart of BLE Modules

transmission chart

Master/slave mode of BLE Modules

master_slave

iBeacon of BLE Modules

ibeacon

Images of BLE Modules

Ble Modules

Specifications

Wireless Parameter  
Wireless Standard 802.15.1
Frequency Range 2.402GHz-2.480GHz
Transmit Power -18dBm to +3dBm
User can configure the power
Receiving Sensitivity -89dBm
Antenna Selection External: I-PEX connector
Internal: on-board antenna
Hardware Parameter  
Data Interface UART: 2400bps - 115200bps
Working Voltage 1.9V~5.5V
Working Current 60nA~12mA
Working Temp -40°C- 85°C
Storage Temp -40°C- 125°C
Dimension 18.2×26.7×3(mm)
Software Parameter  
Device Type Master/slave device
Security Mechanism 128 bit AES engine
Encryption PC1 encryption
Working Mode Master device,slave device,broadcast mode
Setting Command AT+ command structure
User Configuration Serial AT command,transparent transmission AT command
Application Software Support customization

How to Buy

Official Online ShopClick to order USR-BLE100
Contacts SalesYou can leave a message for our sales below.

Customer ReviewWrite a Review

Displaying 1 to 5 (of 0 reviews)

Request a Quote

Request a quote or get more products/services/promotions. We will reply to you in a business day. (Your email address will not be shared with a third party.)