USR-WIFI232-B RF tool RT5350QA User Manual

 USR-WIFI232-B(WIFI Module) RF tool RT5350QA User Manual

 

1.Set USR-WIFI232-B(WIFI Module) into serial port AT command mode, then use AT+EPHY open Ethernet port and AT+ATED enter test mode.

2.After completing step1, running RT5350QA and connect module to PC through LAN. Then select the network adapter as following image.

 

USR-WIFI232-B RF tool RT5350QA User Manual

 

 

3.When WIFI module connect properly, displaying following interface.

USR-WIFI232-B RF tool RT5350QA User Manual

Tx setting

USR-WIFI232-B RF tool RT5350QA User Manual

 

STEP 1:Choose test channel, including channel1~channel 13.

STEP 2:Choose transmit mode, cck represent 11b, OFDM represent 11g, HT MixMode represent 11n.

STEP 3:Choose Tx rate,

STEP 4:Choose bandwidth,11b/11g/11n-ht20 use 20,11n-ht40 use 40

STEP 5:change repeat from 1000 to 0,mains continue transmitter。

STEP 6:After setting above step1-step5, click start TX . Module start sending data.

Note:7 is parameter of transmitted power, 8 is parameter of frequency offset. Both of them are module default parameters, don’t need to be change.

 

USR-WIFI232-B RF tool RT5350QA User Manual 4.png

STEP 1:Choose test channel, channel1~channel 13.

STEP 2:Choose One RX path.

STEP 3:Click start RX,module enter RX mode。

STEP 4:Display receive package status.

STEP 5:Click here to start counting again.

 

Note:After changing channel, needing click start RX again.