FAQ of Industrial CAN to Ethernet Converter - No udp traffic


I bought the Industrial CAN to Ethernet Converter-USR-CANET200 from amazon.de
I can config the device the webserver works, the blue led blinks - can signal is on
i set up canet200 as udp server - but there is no udp traffic - i test it with wireshark
Is there a Firmware Update available
my device has V1.0.23



FW V1.0.23 is the last firmware version;

You should send data from ethernet port to serial port first, then serial port can communication with the last communicating ethernet port

see as the pic shows

how to set can to ethernet converter